Tag Archives: cycloidal gearbox

China Low Price B09 Cycloidal Pin Gear Reducer Horizontal Gearbox Bwd Bld Cycloid Reducer Gearbox worm gear box elecon

Solution Description

                              SC Transmission Cycloidal gearbox Cyclo Travelcyc lo equipment box   Reduced value b09 cycloidal pin gear reducer horizontal gearbox BWD BLD cycloid reducer gearbox

Product Description

 

Cyclo Generate are unsurpassed where generate engineering is worried.  The Cyclo push is superior to classic gear mechanisms, considering that it only operates with rolling drive and is not exposed to shear forces.  By comparison with gears with speak to masses, Cyclo drives are much more resistant and can soak up excessive shock hundreds by indicates of uniform load distribution more than the electricity transmitting parts.  Cyclo drives and Cyclo drive geared motors are characterized by their reliability, prolonged provider daily life and exceptional effectiveness, even under tough problems.

Programs:Conveyor techniques,Meals and sugar business,Mixers and agitators,Metalworking machines,Water therapy crops,Recycling vegetation,Poultry Processing Gear,Sawmills and woodworking machines,Rolling mills,Design machinery,Paper market

Cycloidal Reducer 
Electrical power variety:.twelve-90KW
Transmission ration assortment:7-650000
Output torque(Kn.m):top to 30
 

Merchandise Parameters

 

 

Business Profile

FAQ

 

Transport

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Gear Shape: Bevel Gear
Step: Single-Step
Type: Worm Reducer
Output Torque: Top to 30 Kn.M
Mount Position: Horizontal/Vertical

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Gear Shape: Bevel Gear
Step: Single-Step
Type: Worm Reducer
Output Torque: Top to 30 Kn.M
Mount Position: Horizontal/Vertical

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
worm reducer

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
worm reducer

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
worm reducer

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

China Low Price B09 Cycloidal Pin Gear Reducer Horizontal Gearbox Bwd Bld Cycloid Reducer Gearbox     worm gear box eleconChina Low Price B09 Cycloidal Pin Gear Reducer Horizontal Gearbox Bwd Bld Cycloid Reducer Gearbox     worm gear box elecon
editor by czh 2023-01-28

China factory horizontal cycloidal gearbox hypoid bevel gear

Model Number: X42–128
Gearing Arrangement: Cycloidal
Output Torque: 284n.m–34107n.m
Rated Power: 0.37–15kw
Input Speed: 0–1500r/min
Output Speed: 0.19–12.4r/min
Ratio: 121-7569
Packaging Details: wooden case
Port: HangZhou

Sumitomo Design Cycloidal Electric Motor With Gear Reducer

Company Information

HangZhou City Xihu (West Lake) Dis. CZPT Speed Reducer Co., Ltd. is a specially appointed enterprise producing all sorts of speed reducers in Northern China.

Main products: ZDY, ZLY, ZSY, ZFY, DBY(K), DCY(K), and DFY Hardened reducers; NGW, NGW-L, and NGW-S planet gear speed reducers; B and X series of cycloidal planetary gear speed reducers; ZQ, ZD, ZL, ZS, and ZSC(A) series of cylindrical gear reducers; WXJ, and WD series, M-type and A-type vertical worm gear reducers; YTC and YCJ speed reducing motors and Y-type 315-630 oil cooling electric drive drums. Recently, S, K, R, F, and T series of modular reducers have come into operation in our company. At the same time, high precision 110VDC 220VDC planetary gearbox dc geared motor 200W 300W 400W our products of excellent quality, and with reasonable price and superior service, are sold countrywide including more than 20 provinces, cities and municipalities and are sold overseas, such as in Southeast Asia.

Cycloid cycloid gear meshing machine, planetary transmission principle, it is often called planetary cycloid reducer.

Planetary cycloid reducer can be widely used in petroleum, environmental, chemical, cement, transportation, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driver or deceleration device, the machine is divided into horizontal, vertical, axis type and direct-type and other assembly methods.

Its unique smooth structure in many cases can replace ordinary cylindrical gear reducer and worm reducer, therefore, planetary cycloid reducer is widely used in various industries and fields, High Quality Helical Worm Type S Series Gear Box Reducer SA Helical-Worm Gearmotor With Hollow Shaft Output was widely welcomed by the majority of users.

1. large transmission ratio. A reduction gear transmission ratio of 1/6–1/87; 2 stage reducer transmission ratio is 1/99–1/7569; 3 stage gear transmission ratio is 1/5841–1/658503. In addition to still can use multistage combination, ratio reaches the specified in.

2. High transmission efficiency. Because the engaging position using the rolling contact, the general level of transmission efficiency for 90%–95%.

3. Compact structure, small volume, light weight. Compared with the volume and the ordinary cylinder gear reducer can be reduced by 1/2–2/3.

4. Long service life, less failure. The main drive gear meshing parts manufacturing using bearing steel grinding, so the mechanical properties and wear resistance are good, but also because of the rolling friction, and thus less failure, long life.

5. Stable and reliable operation. Due to the multi tooth meshing transmission process, so that stable and reliable operation, low noise.

6. Convenient assembly and disassembly, easy repair.

7. Strong overload capacity, high impact, small moment of inertia, suitable for frequent starting characteristics and the positive and negative transfer.

♦According to the different installation forms for vertical, horizontal and with TB support :

1.High speed ratio and efficiency
Single stage transmission can reach to 1:87
of speed-down ratio and the efficiency is more than 90%. If use multi-speed drive the speed-down ratio is bigger.
2.Compact
Being adapted epicyclic transmission principle, the input and output shaft are at same axis center, it is compact.
3.Smooth and stable run and low noiseThe cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.
4.Reliable in operation and long lifeBecause the main parts are made of bearing steel through quenching treatment(HRC58-62), it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.Because of reasonable in design, High Quality HS060 Planetary Reduction Gear Gearbox Speed Reducer For 3 Arcmin Servo Motor High Precision Straight-tooth convenient in maintenance, easy to disassemble and assemble, the minimum amount of part and simple lubrication, so it is trusted by customers deeply.

Range of Ratio for Single Stage:

11,17,23,29,35,43,59,71,87

Range of Ratio for Multi-Speed Drive:

121,187,289,391,473,595,731,841,1003,1225,1505,1849,2065,2537,3481, High Torque Low Noise 24 Volt 48V Watt Electric DC Brushed Planetary Gear Motor With Planetary Gearbox 4189,5133,7569

FAQWhy do so many customers choose us?

1).Competitive price

2).Perfect After-Sale Service

3).One year guarantee time

4).Various kinds of models available

5).We accept customized products as per your special requirement

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China factory horizontal cycloidal gearbox     hypoid bevel gearChina factory horizontal cycloidal gearbox     hypoid bevel gear

china wholesaler Aokman Drive Cycloid Gearbox Gear Reducer 150~20, 000n. M Cycloidal Gearbox manufacturers

Product Description

Solution Description

AOKMAN Push cycloid gearbox gear reducer 150~20,000N.m Cycloidal Gearbox

Parts:

one. Housing: Solid Iron
two. Gearset: Cycloid Wheel & Pin Wheel
3. Enter Configurations:
Outfitted with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-evidence CZPT , Controlled CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Reliable Shaft Enter
four. Output Configurations:
Keyed Sound Shaft Output
 

Thorough Pictures

Functions:

one. Massive reduction ratio, 1-stage ratio 9~87, 2-phase ratio 121~1849, greater reduction ratio is CZPT by 3-stage or multistage combinations
two. CZPT effectiveness, the average performance is above ninety%
three. Compact framework, light weight
four. Secure and dependable operation, low noise5. CZPT provider existence

Item Parameters

Parameters:

Designs Power Ratio Max. Torque Output Shaft Dia. Enter Shaft Dia.
1 Phase
X2(B0/B12) .37~1.5 9~87 a hundred and fifty Φ25(Φ30) Φ15
X3(B1/B15) .fifty five~2.two 9~87 250 Φ35 Φ18
X4(B2/B18) .seventy five~4. 9~87 500 Φ45 Φ22
X5(B3/B22) 1.5~7.5 nine~87 one,000 Φ55 Φ30
X6(B4/B27) two.2~11 nine~87 two,000 Φ65(Φ70) Φ35
X7 three.~eleven nine~87 two,700 Φ80 Φ40
X8(B5/B33) 5.5~eighteen.5 9~87 four,500 Φ90 Φ45
X9(B6/B39) 7.5~30 9~87 7,a hundred Φ100 Φ50

X10(B7/B45) fifteen~45 9~87 12,000 Φ110 Φ55
X11(B8/B55) 18.5~fifty five nine~87 20,000 Φ130 Φ70
2 Stage
X32(B10) .twenty five~.fifty five 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.seventy five 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.5 121~1849 Φ55 Φ18
X63(B41/B2715) .seventy five~2.2 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .75~2.two 121~1849 Φ65(Φ70) Φ22
X74 one.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) 1.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) two.2~5.five 121~1849 Φ90 Φ30
X95(B63/B3922) three.~7.5 121~1849 Φ100 Φ30
X106(B74/B4527) 4.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) four.~fifteen 121~1849 Φ130 Φ40(Φ35)

1 Stage Ratio: 9, 11, 17, 23, 29, 35, 43, 59, seventy one, 87
2 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Installation:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Phase X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bath & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Phase X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bath & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
Organic CZPT

Packaging & CZPT

Company Profile

Our Rewards

FAQ

1.Q:What types of gearbox can you produce for us?

A:Primary merchandise of CZPT organization: UDL collection pace variator,RV series CZPT reducer, ATA sequence shaft mounted gearbox, X,B collection gear reducer,
P sequence planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, much more
than one particular hundred models and countless numbers of technical specs
2.Q:Can you make as for each CZPT drawing?
A: Of course, we supply CZPT ized provider for CZPT ers.
3.Q:What is your phrases of payment ?
A: 30% CZPT payment by T/T right after signing the agreement.70% prior to shipping
four.Q:What is your MOQ?
A: 1 Set

Welcome to contact us for a lot more detail info and inquiry.
If you have specific parameters and requirement for CZPT gearbox, CZPT ization is CZPT .

Ep Gear’s worm gears use appropriate-angle (90°) non-intersecting shafts to provide an productive resolution for electricity transmission programs necessitating large reduction ratios in confined areas. When appropriately used, worm gears supply the smoothest and quietest type of transmission. Since the effectiveness of a worm travel depends on the lead angle and the amount of stars on the worm – given that effectiveness is constantly the goal, this ratio ought to be held as low as possible. To work effectively, the worm and worm equipment employed collectively must have the same diameter, pitch and thread.
china  wholesaler Aokman Drive Cycloid Gearbox Gear Reducer 150~20, 000n. M Cycloidal Gearbox manufacturers

china wholesaler X/B Series Gearbox Withstand Large Overload Capacity Cycloidal Wheel Speed Reducer manufacturers

Item Description

Product Description

X/B collection gearbox withstand massive overload capacity Cycloidal Wheel CZPT Reducer

Elements:

one. Housing: Cast Iron
2. Gearset: Cycloid Wheel & Pin Wheel
three. Enter Configurations:
Geared up with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-evidence CZPT , Regulated CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Reliable Shaft Enter
4. Output Configurations:
Keyed Sound Shaft Output
 

Comprehensive Images

Characteristics:

one. Huge reduction ratio, 1-phase ratio 9~87, 2-stage ratio 121~1849, greater reduction ratio is CZPT by 3-stage or multistage combos
2. CZPT effectiveness, the common performance is in excess of ninety%
three. Compact construction, gentle excess weight
four. Secure and reliable operation, minimal noise5. CZPT provider life

Merchandise Parameters

Parameters:

Versions Electrical power Ratio Max. Torque Output Shaft Dia. Enter Shaft Dia.
1 Stage
X2(B0/B12) .37~1.five 9~87 a hundred and fifty Φ25(Φ30) Φ15
X3(B1/B15) .fifty five~2.2 nine~87 250 Φ35 Φ18
X4(B2/B18) .75~4. nine~87 500 Φ45 Φ22
X5(B3/B22) one.5~7.5 9~87 1,000 Φ55 Φ30
X6(B4/B27) 2.2~eleven 9~87 two,000 Φ65(Φ70) Φ35
X7 three.~eleven nine~87 2,seven hundred Φ80 Φ40
X8(B5/B33) five.5~18.five 9~87 4,500 Φ90 Φ45
X9(B6/B39) 7.5~30 9~87 7,100 Φ100 Φ50

X10(B7/B45) fifteen~forty five nine~87 twelve,000 Φ110 Φ55
X11(B8/B55) 18.5~55 nine~87 twenty,000 Φ130 Φ70
2 Phase
X32(B10) .25~.55 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.75 121~1849 Φ45 Φ15
X53(B31/B2215) .fifty five~1.5 121~1849 Φ55 Φ18
X63(B41/B2715) .seventy five~2.two 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .75~2.2 121~1849 Φ65(Φ70) Φ22
X74 one.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) 1.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) 2.2~5.5 121~1849 Φ90 Φ30
X95(B63/B3922) three.~7.five 121~1849 Φ100 Φ30
X106(B74/B4527) 4.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) four.~fifteen 121~1849 Φ130 Φ40(Φ35)

1 Phase Ratio: 9, eleven, 17, 23, 29, 35, forty three, 59, seventy one, 87
two Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Set up:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Phase X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Phase X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
All-natural CZPT

Packaging & CZPT

Organization Profile

Our Advantages

FAQ

1.Q:What types of gearbox can you generate for us?

A:Principal merchandise of CZPT business: UDL collection velocity variator,RV collection CZPT reducer, ATA collection shaft mounted gearbox, X,B sequence gear reducer,
P sequence planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, a lot more
than 1 hundred designs and thousands of requirements
two.Q:Can you make as for each CZPT drawing?
A: Indeed, we provide CZPT ized service for CZPT ers.
3.Q:What is your phrases of payment ?
A: 30% CZPT payment by T/T right after signing the deal.70% ahead of supply
4.Q:What is your MOQ?
A: 1 Set

Welcome to get in touch with us for more element details and inquiry.
If you have specific parameters and need for CZPT gearbox, CZPT ization is CZPT .

As the most compact little precision equipment technique, worm gear sets offer substantial reduction ratios in a really little area. Worm gear sets transmit movement between disjoint proper-angle shafts and provide the quietest, smoothest operating procedure of any equipment kind.
china  wholesaler X/B Series Gearbox Withstand Large Overload Capacity Cycloidal Wheel Speed Reducer manufacturers

china Cost X/B Series Speed Reducer Cycloidal Gearbox and Electric Motor manufacturers

Solution Description

Product Description

X/B Collection CZPT Reducer Cycloidal Gearbox and CZPT ctric CZPT

Elements:

1. Housing: Solid Iron
2. Gearset: Cycloid Wheel & Pin Wheel
3. Enter Configurations:
Equipped with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-proof CZPT , Regulated CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Strong Shaft Input
4. Output Configurations:
Keyed Sound Shaft Output
 

Comprehensive Photos

Characteristics:

1. Big reduction ratio, 1-stage ratio 9~87, 2-stage ratio 121~1849, larger reduction ratio is CZPT by 3-phase or multistage combos
two. CZPT performance, the regular efficiency is over ninety%
three. Compact construction, gentle weight
four. Secure and reliable operation, low noise5. CZPT provider lifestyle

Product Parameters

Parameters:

Models Energy Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Phase
X2(B0/B12) .37~1.five nine~87 a hundred and fifty Φ25(Φ30) Φ15
X3(B1/B15) .55~2.2 nine~87 250 Φ35 Φ18
X4(B2/B18) .seventy five~4. 9~87 500 Φ45 Φ22
X5(B3/B22) one.5~7.5 nine~87 1,000 Φ55 Φ30
X6(B4/B27) two.2~11 9~87 two,000 Φ65(Φ70) Φ35
X7 3.~eleven 9~87 two,700 Φ80 Φ40
X8(B5/B33) five.5~18.five nine~87 four,five hundred Φ90 Φ45
X9(B6/B39) 7.5~thirty nine~87 7,a hundred Φ100 Φ50

X10(B7/B45) fifteen~forty five nine~87 twelve,000 Φ110 Φ55
X11(B8/B55) eighteen.5~55 nine~87 20,000 Φ130 Φ70
2 Stage
X32(B10) .25~.fifty five 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.75 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.5 121~1849 Φ55 Φ18
X63(B41/B2715) .seventy five~2.two 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .seventy five~2.2 121~1849 Φ65(Φ70) Φ22
X74 1.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) one.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) two.2~5.5 121~1849 Φ90 Φ30
X95(B63/B3922) three.~7.five 121~1849 Φ100 Φ30
X106(B74/B4527) 4.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) 4.~15 121~1849 Φ130 Φ40(Φ35)

one Stage Ratio: 9, eleven, 17, 23, 29, 35, forty three, 59, 71, 87
2 Phase Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Set up:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Phase X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bath & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Phase X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
All-natural CZPT

Packaging & CZPT

Business Profile

Our Rewards

FAQ

1.Q:What kinds of gearbox can you generate for us?

A:Principal items of CZPT company: UDL series velocity variator,RV collection CZPT reducer, ATA sequence shaft mounted gearbox, X,B sequence equipment reducer,
P collection planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, far more
than a single hundred versions and countless numbers of technical specs
2.Q:Can you make as for every CZPT drawing?
A: Of course, we offer CZPT ized support for CZPT ers.
3.Q:What is your conditions of payment ?
A: thirty% CZPT payment by T/T right after signing the contract.70% before shipping and delivery
four.Q:What is your MOQ?
A: 1 Set

Welcome to speak to us for much more depth data and inquiry.
If you have certain parameters and necessity for CZPT gearbox, CZPT ization is CZPT .

Worm gears are correct angle drives that offer big gear ratios with reasonably limited heart-to-center distances from 1/4″ to 11″. When effectively put in and lubricated, they serve as the quietest, smoothest-working gear variety. Due to the fact worm gear drives can accomplish substantial gear ratios, highest reduction can be reached in a more compact place than a lot of other types of equipment drives. The worm and worm equipment operate at a 90° angle on non-intersecting axes.
china  Cost X/B Series Speed Reducer Cycloidal Gearbox and Electric Motor manufacturers

china Custom Aokman High Efficiency 2 Stage High Ratio 121~1849 Cycloidal Gearbox manufacturers

Solution Description

AOKMAN CZPT Effectiveness 2 Phase CZPT Ratio 121~1849 Cycloidal Gearbox

Factors:

1. Housing: Solid Iron
2. Gearset: Cycloid Wheel & Pin Wheel
three. Enter Configurations:
Equipped with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-proof CZPT , Regulated CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Sound Shaft Enter
4. Output Configurations:
Keyed Reliable Shaft Output

Functions:

1. Big reduction ratio, 1-phase ratio 9~87, 2-stage ratio 121~1849, greater reduction ratio is CZPT by 3-stage or multistage mixtures
two. CZPT performance, the common effectiveness is over 90%
three. Compact framework, gentle bodyweight
4. Stable and reputable operation, lower noise5. CZPT provider lifestyle

Parameters:

Models Power Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Phase
X2(B0/B12) .37~1.five 9~87 a hundred and fifty Φ25(Φ30) Φ15
X3(B1/B15) .fifty five~2.2 nine~87 250 Φ35 Φ18
X4(B2/B18) .75~4. nine~87 500 Φ45 Φ22
X5(B3/B22) 1.5~7.5 9~87 1,000 Φ55 Φ30
X6(B4/B27) two.2~eleven 9~87 2,000 Φ65(Φ70) Φ35
X7 three.~eleven 9~87 two,seven hundred Φ80 Φ40
X8(B5/B33) 5.5~18.five 9~87 4,five hundred Φ90 Φ45
X9(B6/B39) seven.5~thirty nine~87 7,100 Φ100 Φ50

X10(B7/B45) fifteen~forty five nine~87 12,000 Φ110 Φ55
X11(B8/B55) 18.5~fifty five nine~87 twenty,000 Φ130 Φ70
2 Phase
X32(B10) .25~.55 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.75 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.5 121~1849 Φ55 Φ18
X63(B41/B2715) .75~2.2 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .seventy five~2.2 121~1849 Φ65(Φ70) Φ22
X74 one.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) one.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) 2.2~5.5 121~1849 Φ90 Φ30
X95(B63/B3922) three.~7.5 121~1849 Φ100 Φ30
X106(B74/B4527) four.~11 121~1849 Φ110 Φ35
X117(B84/B5527) four.~15 121~1849 Φ130 Φ40(Φ35)

one Phase Ratio: 9, eleven, seventeen, 23, 29, 35, 43, 59, seventy one, 87
2 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Set up:
Foot Mounted
Flange Mounted

Lubrication:

Foot-mounted Flange-mounted
1 Phase X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Stage X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
Natural CZPT

product pictures:

Our organization :
AOKMAN® was founded in 1982, which has a lot more than 36 several years in R & D and production of gearboxes, gears, shaft, motor and spare elements.
We can supply the appropriate resolution for uncountable purposes. Our goods are widely utilised in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market place and CZPT other varieties of devices with a strong presence in the global industry.
AOKMAN® has turn into a reliable supplier, ready to provide large high quality gearboxes.With 36 years experience, we assure you the utmost trustworthiness and security for each item and services.

Buyer visiting:

FAQ:
one.Q:What kinds of gearbox can you make for us?
A:Primary items of CZPT firm: UDL collection speed variator,RV sequence CZPT reducer, ATA collection shaft mounted gearbox, X,B sequence equipment reducer,
P sequence planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, far more
than 1 hundred designs and thousands of requirements
two.Q:Can you make as per CZPT drawing?
A: Yes, we offer you CZPT ized services for CZPT ers.
three.Q:What is your phrases of payment ?
A: 30% CZPT payment by T/T after signing the contract.70% just before supply
four.Q:What is your MOQ?
A: 1 Set

Welcome to speak to us for more element data and inquiry.
If you have particular parameters and necessity for CZPT gearbox, CZPT ization is CZPT .

The equipment ratio of the worm equipment set is established by dividing the number of tooth of the equipment by the quantity of threads. Therefore, single thread yields larger ratios than multithreading. All ep worm equipment bushings have left or right thread. ep worm gear sets are obtainable in solitary, double, triple and quadruple threads.
china  Custom Aokman High Efficiency 2 Phase High Ratio 121~1849 Cycloidal Gearbox companies

china Custom Cycloidal Gearbox 0.37kw~55kw Planetary Gear Speed Reducer Cycloidal Reducer manufacturers

Product Description

Solution Description

Cycloidal gearbox .37KW~55KW planetary gear velocity reducer cycloidal reducer

Components:

1. Housing: Forged Iron
2. Gearset: Cycloid Wheel & Pin Wheel
three. Input Configurations:
Geared up with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-evidence CZPT , Controlled CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Reliable Shaft Enter
four. Output Configurations:
Keyed Sound Shaft Output
 

Detailed Pictures

Attributes:

1. Huge reduction ratio, 1-phase ratio 9~87, 2-phase ratio 121~1849, bigger reduction ratio is CZPT by 3-stage or multistage combos
2. CZPT effectiveness, the common efficiency is more than 90%
3. Compact construction, gentle fat
4. Steady and dependable procedure, lower noise5. CZPT service daily life

Product Parameters

Parameters:

Versions Power Ratio Max. Torque Output Shaft Dia. Enter Shaft Dia.
1 Phase
X2(B0/B12) .37~1.five nine~87 150 Φ25(Φ30) Φ15
X3(B1/B15) .fifty five~2.2 nine~87 250 Φ35 Φ18
X4(B2/B18) .seventy five~4. nine~87 500 Φ45 Φ22
X5(B3/B22) one.5~7.five nine~87 one,000 Φ55 Φ30
X6(B4/B27) two.2~eleven 9~87 2,000 Φ65(Φ70) Φ35
X7 three.~eleven nine~87 two,seven hundred Φ80 Φ40
X8(B5/B33) 5.5~eighteen.5 9~87 4,five hundred Φ90 Φ45
X9(B6/B39) 7.5~thirty nine~87 7,one hundred Φ100 Φ50

X10(B7/B45) 15~45 nine~87 12,000 Φ110 Φ55
X11(B8/B55) 18.5~fifty five 9~87 20,000 Φ130 Φ70
2 Stage
X32(B10) .twenty five~.55 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.seventy five 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.5 121~1849 Φ55 Φ18
X63(B41/B2715) .75~2.two 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .75~2.two 121~1849 Φ65(Φ70) Φ22
X74 1.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) 1.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) two.2~5.five 121~1849 Φ90 Φ30
X95(B63/B3922) 3.~7.5 121~1849 Φ100 Φ30
X106(B74/B4527) four.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) four.~fifteen 121~1849 Φ130 Φ40(Φ35)

one Stage Ratio: 9, 11, seventeen, 23, 29, 35, forty three, fifty nine, 71, 87
2 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Installation:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Stage X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Stage X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
Organic CZPT

Packaging & CZPT

Organization Profile

Our Positive aspects

FAQ

1.Q:What sorts of gearbox can you produce for us?

A:Main products of CZPT business: UDL series speed variator,RV collection CZPT reducer, ATA sequence shaft mounted gearbox, X,B collection equipment reducer,
P collection planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, far more
than one particular hundred versions and thousands of specifications
two.Q:Can you make as for each CZPT drawing?
A: Of course, we offer you CZPT ized provider for CZPT ers.
3.Q:What is your phrases of payment ?
A: 30% CZPT payment by T/T right after signing the contract.70% just before shipping and delivery
four.Q:What is your MOQ?
A: 1 Set

Welcome to get in touch with us for much more detail data and inquiry.
If you have specific parameters and need for CZPT gearbox, CZPT ization is CZPT .

The major gain of worm gears is their capability to supply high reduction ratios and correspondingly high torque multipliers. They can also be utilized as reducers for lower to medium speed apps. Also, simply because their reduction ratio is primarily based on the quantity of enamel on the equipment, they are more compact than other sorts of gears. Like wonderful pitch leadscrews, worm gears are typically self-locking, making them best for hoisting and hoisting purposes.
china  Custom Cycloidal Gearbox 0.37kw~55kw Planetary Gear Speed Reducer Cycloidal Reducer manufacturers

china Cost Aokman Wb Speed Reduction Gearbox Cycloidal Pin-Wheel Reducer for Pelletizer manufacturers

Solution Description

 

Product Description

Aokman WB velocity reduction gearbox cycloidal pin-wheel reducer for pelletizer 

Parts:
one. Housing: Forged Iron
two. Gearset: Cycloid Wheel & Pin Wheel
3. Enter Configurations:
Equipped with CZPT ctric CZPT s (3 Period AC CZPT , One Stage AC CZPT , Brake CZPT , Servo CZPT )
IEC-normalized CZPT Flange
Keyed Strong Shaft Enter
four. Output Configurations:
Keyed Reliable Shaft Output

Detailed Photos

Functions:
1. WB sequence cycloidal reducers have the exact same functions and attributes with X & B series cycloidal reducers. The differences are WB collection cycloidal reducers have more compact measurements and CZPT
two. Grease lubrication, oil leak is not feasible
3. A number of mounting options

Product Parameters

Types Electricity Ratio Max. Torque Output Shaft Dia. Input Shaft Dia.
1 Phase
WB65 .04~.12 nine~87 25 Φ12 Φ10
WB85 .09~.37 nine~87 60 Φ14 Φ12
WB100 .18~.75 nine~87 a hundred and twenty Φ18 Φ14
WB120 .37~1.5 9~87 a hundred and eighty Φ30 Φ15
WB150 .55~3. 9~87 250 Φ35 Φ20
2 Stage
WBE1065 .04~.12 121~1849 120 Φ18 Φ10
WBE1285 .09~.37 121~1849 one hundred eighty Φ30 Φ12
WBE1510 .18~.75 121~1849 250 Φ35 Φ14

one Stage Ratio: 9, 11, seventeen, 23, 29, 35, forty three, 59, 71, 87
2 Phase Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Set up:
Foot Mounted
Flange Mounted
Lubrication:
Grease CZPT
Cooling:
Natural CZPT

 

Packaging & CZPT

Firm Profile

After Sales Support

Pre-sale providers one. Decide on products design.
2.Layout and manufacture goods in accordance to clients’ unique need.
3.Teach technological personalized for clientele
Services for the duration of marketing 1.Pre-check out and settle for goods forward of shipping and delivery.
2. Assist clients to draft resolving strategies.
After-sale solutions 1.Assist clients to prepare for the very first construction scheme.
two. Teach the initial-line operators.
three.Just take initiative to eliminate the trouble quickly.
4. Offer specialized exchanging.

FAQ

Our Companies:FAQ:

one.Q:What kinds of gearbox can you generate for us?
A:Principal products of CZPT business: UDL series speed variator,RV sequence CZPT reducer, ATA sequence shaft mounted gearbox, X,B series equipment reducer,
P series planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, more
than one particular hundred models and 1000’s of specifications
2.Q:Can you make as for every CZPT drawing?
A: Of course, we offer you CZPT ized services for CZPT ers.
3.Q:What is your conditions of payment ?
A: thirty% CZPT payment by T/T after signing the agreement.70% ahead of delivery
four.Q:What is your MOQ?
A: 1 Set

If you have any need for CZPT products you should come to feel free of charge to contact me. 

The suggested resources for the worm are hardened metal and bronze for the worm gear. Even so, depending on the application, unhardened steel worms can operate sufficiently and more economically on forged iron worm gears rated at fifty%. In addition to metal and hardened metal, worms are offered in stainless metal, aluminum, bronze, and nylon worm gears are available in steel, hardened steel, stainless metal, aluminum, nylon, and non-metallic (phenolic).
china  Cost Aokman Wb Speed Reduction Gearbox Cycloidal Pin-Wheel Reducer for Pelletizer manufacturers

china manufacturer manufacturer Custom Aokman Drive 1500 Rpm Gearbox Cycloidal Gear Speed Reducer manufacturers

Item Description

Item Description

AOKMAN Travel 1500 rpm gearbox cycloidal gear velocity reducer

Parts:

one. Housing: Cast Iron
2. Gearset: Cycloid Wheel & Pin Wheel
three. Input Configurations:
Equipped with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-evidence CZPT , Regulated CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Solid Shaft Input
4. Output Configurations:
Keyed Reliable Shaft Output
 

In depth Pictures

Attributes:

one. Big reduction ratio, 1-phase ratio 9~87, 2-stage ratio 121~1849, greater reduction ratio is CZPT by 3-stage or multistage combos
two. CZPT effectiveness, the regular effectiveness is above ninety%
three. Compact structure, light weight
four. Secure and reliable procedure, minimal noise5. CZPT services daily life

Merchandise Parameters

Parameters:

Models Electricity Ratio Max. Torque Output Shaft Dia. Enter Shaft Dia.
1 Phase
X2(B0/B12) .37~1.5 nine~87 one hundred fifty Φ25(Φ30) Φ15
X3(B1/B15) .55~2.2 nine~87 250 Φ35 Φ18
X4(B2/B18) .75~4. nine~87 500 Φ45 Φ22
X5(B3/B22) one.5~7.five 9~87 one,000 Φ55 Φ30
X6(B4/B27) two.2~eleven 9~87 2,000 Φ65(Φ70) Φ35
X7 three.~11 9~87 two,seven-hundred Φ80 Φ40
X8(B5/B33) 5.5~18.5 9~87 four,five hundred Φ90 Φ45
X9(B6/B39) 7.5~thirty 9~87 7,one hundred Φ100 Φ50

X10(B7/B45) fifteen~45 nine~87 12,000 Φ110 Φ55
X11(B8/B55) 18.5~55 9~87 twenty,000 Φ130 Φ70
2 Stage
X32(B10) .twenty five~.fifty five 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.seventy five 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.five 121~1849 Φ55 Φ18
X63(B41/B2715) .seventy five~2.two 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .75~2.two 121~1849 Φ65(Φ70) Φ22
X74 one.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) 1.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) two.2~5.5 121~1849 Φ90 Φ30
X95(B63/B3922) 3.~7.5 121~1849 Φ100 Φ30
X106(B74/B4527) 4.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) 4.~fifteen 121~1849 Φ130 Φ40(Φ35)

1 Stage Ratio: 9, eleven, seventeen, 23, 29, 35, forty three, fifty nine, 71, 87
2 Phase Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Installation:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Phase X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-tub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Phase X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
Organic CZPT

Packaging & CZPT

Business Profile

Our Advantages

FAQ

one.Q:What kinds of gearbox can you generate for us?

A:Main products of CZPT company: UDL collection speed variator,RV sequence CZPT reducer, ATA series shaft mounted gearbox, X,B series equipment reducer,
P collection planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, far more
than 1 hundred types and countless numbers of requirements
2.Q:Can you make as per CZPT drawing?
A: Of course, we supply CZPT ized service for CZPT ers.
3.Q:What is your phrases of payment ?
A: 30% CZPT payment by T/T right after signing the agreement.70% just before shipping and delivery
4.Q:What is your MOQ?
A: 1 Set

Welcome to make contact with us for a lot more detail info and inquiry.
If you have particular parameters and need for CZPT gearbox, CZPT ization is CZPT .

The equipment ratio of the worm equipment set is identified by dividing the amount of tooth of the equipment by the quantity of threads. For that reason, single thread yields increased ratios than multithreading. All ep worm gear bushings have left or correct thread. ep worm equipment sets are available in single, double, triple and quadruple threads.
china  manufacturer  manufacturer  Custom Aokman Drive 1500 Rpm Gearbox Cycloidal Gear Speed Reducer manufacturers

china best Aokman Manufacturer B Series Cycloidal Gearbox Reducer with Motor Mini Cycloidal Gear Box manufacturers

Merchandise Description

Solution Description

 AOKMAN CZPT r B collection Cycloidal gearbox reducer with motor mini cycloidal CZPT

Factors:

1. Housing: Cast Iron
two. Gearset: Cycloid Wheel & Pin Wheel
three. Enter Configurations:
Outfitted with CZPT ctric CZPT s (AC CZPT , Brake CZPT , Explosion-proof CZPT , Regulated CZPT CZPT , CZPT ulic CZPT )
IEC-normalized CZPT Flange
Keyed Solid Shaft Enter
4. Output Configurations:
Keyed Strong Shaft Output
 

Thorough Photographs

Characteristics:

1. Big reduction ratio, 1-stage ratio 9~87, 2-phase ratio 121~1849, more substantial reduction ratio is CZPT by 3-stage or multistage combos
two. CZPT efficiency, the typical effectiveness is over ninety%
3. Compact construction, light fat
four. Steady and trustworthy procedure, lower noise5. CZPT provider lifestyle

Product Parameters

Parameters:

Versions Electricity Ratio Max. Torque Output Shaft Dia. Enter Shaft Dia.
1 Stage
X2(B0/B12) .37~1.five 9~87 one hundred fifty Φ25(Φ30) Φ15
X3(B1/B15) .fifty five~2.two nine~87 250 Φ35 Φ18
X4(B2/B18) .seventy five~4. nine~87 500 Φ45 Φ22
X5(B3/B22) one.5~7.5 nine~87 one,000 Φ55 Φ30
X6(B4/B27) 2.2~11 nine~87 two,000 Φ65(Φ70) Φ35
X7 3.~11 nine~87 2,700 Φ80 Φ40
X8(B5/B33) 5.5~eighteen.five 9~87 four,five hundred Φ90 Φ45
X9(B6/B39) 7.5~thirty 9~87 7,100 Φ100 Φ50

X10(B7/B45) fifteen~forty five 9~87 twelve,000 Φ110 Φ55
X11(B8/B55) eighteen.5~55 nine~87 twenty,000 Φ130 Φ70
2 Phase
X32(B10) .twenty five~.55 121~1849 Φ35 Φ15
X42(B20/B1812) .37~.seventy five 121~1849 Φ45 Φ15
X53(B31/B2215) .55~1.five 121~1849 Φ55 Φ18
X63(B41/B2715) .75~2.2 121~1849 Φ65(Φ70) Φ18
X64(B42/B2718) .seventy five~2.two 121~1849 Φ65(Φ70) Φ22
X74 one.1~3. 121~1849 Φ80 Φ22
X84(B52/B3318) 1.5~4. 121~1849 Φ90 Φ22
X85(B53/B3322) two.2~5.five 121~1849 Φ90 Φ30
X95(B63/B3922) three.~7.five 121~1849 Φ100 Φ30
X106(B74/B4527) four.~eleven 121~1849 Φ110 Φ35
X117(B84/B5527) four.~fifteen 121~1849 Φ130 Φ40(Φ35)

1 Phase Ratio: 9, eleven, 17, 23, 29, 35, forty three, fifty nine, 71, 87
2 Phase Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849

Set up:
Foot Mounted
Flange Mounted
Lubrication:

Foot-mounted Flange-mounted
1 Stage X2~X4 X5~X11 X2~X4 X5~X11
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT
2 Phase X32~X42 X53~X117 X32~X42 X53~X117
Grease CZPT Oil-bathtub & Splash CZPT Grease CZPT Oil Pump Circulation CZPT

Cooling:
Natural CZPT

Packaging & CZPT

Company Profile

Our Benefits

FAQ

1.Q:What varieties of gearbox can you generate for us?

A:Main merchandise of CZPT organization: UDL sequence velocity variator,RV sequence CZPT reducer, ATA sequence shaft mounted gearbox, X,B collection gear reducer,
P collection planetary gearbox and R, S, K, and F series CZPT cal-tooth reducer, a lot more
than one particular hundred models and thousands of technical specs
two.Q:Can you make as per CZPT drawing?
A: Of course, we offer CZPT ized support for CZPT ers.
3.Q:What is your terms of payment ?
A: thirty% CZPT payment by T/T after signing the contract.70% before shipping and delivery
four.Q:What is your MOQ?
A: 1 Set

Welcome to get in touch with us for more depth info and inquiry.
If you have certain parameters and prerequisite for CZPT gearbox, CZPT ization is CZPT .

Lubrication is an essential aspect to boost the efficiency of worm equipment transmission. The worm gear action generates a whole lot of warmth, which reduces effectiveness. The electricity delivered at a offered temperature increases with the transmission efficiency. Correct lubrication minimizes friction and warmth, which boosts efficiency.
china  best Aokman Manufacturer B Series Cycloidal Gearbox Reducer with Motor Mini Cycloidal Gear Box manufacturers